Superflex vinyl wallpaper paste

The superflex wallpaper paste is a special adhesive that was specifically developed for use with superflex film wallcoverings and wallpapers made of vinyl. This strong wallpaper paste is already mixed. Before use, you only need to add 300 ml of water and stir well. The superflex wall adhesive is enough to cover an area of approx. 20 m² with one thin and one thick coat.

Before applying the vinyl wallpaper paste, make sure the surface is clean, dry and smooth. Fill in, then sand and smooth any cracks or holes beforehand. High-gloss and non-porous surfaces should also be lightly sanded first. To hang wallpaper, apply a total of two coats of wallpaper paste. The first coat should be thin and needs to dry for at least 30 minutes. Afterwards, evenly spread a second, thicker layer over the surface and apply the wallcovering over the wet wallpaper paste. You can find additional information about the superflex wallpaper paste in the material safety data sheet (PDF).

The high-performance superflex wallpaper paste is suitable for installing:

• Vinyl wallpaper / PVC wallpaper
• Regular wallpaper
• Magnetic wallpaper
• Whiteboard wallpaper
• Extra-heavy wallpaper
• Textile wallpaper / fabric wallpaper
• Glass fibre wallpaper
• Wallpaper overlaps and borders
• Wallpaper on ceilings